Beam Clamps
3/8" Black Wide Mouth Beam Clamp
SKU# 3796
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€1.40
3/8" Electro-Galvanized Junior Beam Clamp
SKU# 1409
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.
€1.01
3/8" Electro-Galvanized Wide Mouth Beam Clamp
SKU# 8668
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€0.83
3/8" Side Beam Connector Black
SKU# 2616
Used for mounting to sides of wood beams using figure drive screws. Bottom hole is tapped for rod.
€0.66
3/8" Black Junior Beam Clamp
SKU# 8667
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.
€1.25
1/2" Black Wide Mouth Beam Clamp
SKU# 1742
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€1.38
1/2" Electro-Galvanized Junior Beam Clamp
SKU# 2142
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.
€1.23
1/2" Electro-Galvanized Wide Mouth Beam Clamp
SKU# 1986
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€1.62
1/2" Black Junior Beam Clamp
SKU# 8670
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.
€1.38
5/8" Black Junior Beam Clamp
SKU# 1456
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.
€2.12
5/8" Black Wide Mouth Beam Clamp
SKU# 4251
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€2.41
5/8" Electro-Galvanized Junior Beam Clamp
SKU# 4796
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.
€2.73
- 1
- 2
